Griot's Garage BOSS Perfecting Foam Pads for Random Orbitals - 6-1/2" Diameter - Qty 2

Video Transcript for Review of Griots Garage Buffing and Polishing Pads - Perfecting Orbital Foam Pads - 349B130F6

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at these Griot's Garage BOSS, perfecting foam pads. These foam pads are going to work with your random orbital for removing hazing, blemishes and other white defects on your vehicles, furnish. Now, the Griot's's garage BOSS line, does have three different options. So this is the middle option. There is also a correcting pad that is going to be more for removing nicks and swirls and other light to moderate defects.

And then you have your perfecting pads here, and then the next step is going to be your finishing pads which are more for applying your finishing creams and other sealants to your paint job. So this is kind of the middle of the road, you'd want to move from one to the other to move from severity, the most severe to the least severe. If you have really deep, blemishes and that sort of thing, you might want to switch from the foam pads to the microfiber, correcting pads. Those are going to spend a little bit faster and get a little bit deeper for you. But if you have just a minimal little scratches, or a hazing that sort of thing, these are going to be a great option for you.

They're going to do a good job connecting to your orbital just gonna stick right onto the back there. This will exhaust air hot air through the center hole there. And so it's not going to build up on the pad itself, prevent the pad from losing its shape or bending, becoming damaged that way, so, that hot air is going to go through there this is a nice lightweight foam. So it's not going to weigh down your orbital, make it difficult to use. So it is gonna do a good job of lasting, a nice long time and allowing to make sure that you're not going to get same patterns in your paint job or anything like that.

These are machine washable as well so you can use them over and over. You've got two different ones here so when one's being washed, you always have one available on hand. These are right about six and a half inches in diameter, and about five eights of an inch thick. And like I said, these are the middle of the line for the BOSS foam pads. They are just a little bit denser than the finishing pads and a little bit less dense than the correcting pads.

So, you do want to make sure that you're getting the right kind for your setup. We do have lots of vehicle detailing products, here @etrailer.com. Different creams and so forth that you can use to make sure that you have a nice, shiny, clear finish on your vehicle, that's going to be free of defects and dents and that sort of thing. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..